Whether you are the owner of a cat or a dog, your pet’s safety is always paramount. A dog fence is crucial for keeping your dogs and cats safe and shielded in your garden. In case your invisible fence suddenly stops working, due to some reasons, such as human error, gardening, or building new construction, it can cause wire breaks over time. Different from visible fences, underground wiring issues are not always obvious, which leaves several homeowners overwhelmed about where the problem is or how serious it might be.
But here is a good thing: Most invisible fence wire breaks implement almost the same patterns, and once you know what indications to look for, the issue becomes much easier to address. In this blog post, you will learn how to identify and fix an invisible fence wire break. No matter if you are a seasoned pet owner or new to electronic pet containment systems, you will find the right solution.
Why is Your Dog Fence Not Working?
Before going ahead to know how to fix a wire break, it is crucial to understand why your dog fence might not be working. A few factors could be at play:
- Power Failure: If your system is not receiving power, it won’t activate. It means your dog won’t have a safety boundary. In this case, check for a power light and ensure the socket is turned on.
- Battery Concerns: Low battery levels can cause to weaken, rendering your fence ineffective. Use your collar tester to test the receiver collar.
- Wire Breaks: A break in the underground wire can cause the whole system to stop working. Your system will emit a high-pitched beeping noise to alert you to a wire break.
How to Identify the Location of a Dog Fence Wire Break?
Identifying the accurate location of a wire break can be tricky, but there are a few methods that can assist you:
- Use a Wire Break Locator: These tools can pinpoint the exact location of a wire break by finding electrical signals along the wire. Wire break locators can usually be hired from the company that supplied your dog fence system.
- Manual Inspection: Walk along the perimeter, checking for visible signs of damage, such as exposed or dug-up wire. Pay attention to areas where garden equipment or animals may have interfered.
- Signal Test: Some systems have a signal test feature that checks wire integrity, helping you locate weak connections.
How to Fix a Dog Fence Wire Break?
Once you have found the wire break, here’s how to fix it:
Major Tools You’ll Require:
- Wire Splices
- Wire Cutters
- Dog Fence Connectors, Splice nuts for fixing the wire break
- Silicone-filled wire nuts
- A shovel or digging tool
Here’s the Step-by-Step Guide:
- Locate the Break: Strictly dig around the area if the wire is buried.
- Trim the Wire Ends: Use wire cutters to remove damaged sections.
- Connect the Wires: Use wire splices to secure and insulate the connection. For waterproofing, use silicone connectors.
- Test the System: After repair, test your dog fence to ensure it’s working accurately.
Conclusion
An invisible fence wire break can be frustrating, but with the right tools and knowledge, you can instantly fix it. At Pet Containment Services, we are always ready to help with wire break repairs and other fence-related concerns. Keep your pet safe and your fence working smoothly by maintaining it regularly.